In-house components核心组件
Components we develop and make — and sell on their own自研自产组件，支持外销
We started out developing components: 10+ years on cartridges, tonearms and platters, all developed and made in-house and all available to buy on their own, to the same specification as the complete turntables. 10+ part numbers to choose from. Cabinet work is not supplied separately — it comes with the complete machine. A brand's engineering team usually asks which parts are ours; here is the honest split, based on what actually ships in the 16+ models we list.我们做组件起家 —— 唱头、唱臂、唱盘自研自产已有 10+ 年，均可单独外销、规格与整机同源；目前 10+ 款可供选择。箱体加工不单独对外，随整机提供。品牌方的工程团队通常会先问：哪些部件是你们自己做的、哪些是外购的 —— 以下是基于本站 16+ 款在产机型实际配置的诚实拆分。
| Models in production在产机型 | 16+ |
|---|---|
| Using our NS01 moving-magnet cartridge (models listed here)采用自产 NS01 动磁唱头（本站机型） | 14 / 16 |
| Using ceramic (piezo) cartridges — entry models (listed here)采用陶瓷（压电）唱头 —— 入门机型（本站机型） | 2 / 16 |
| Shipped with separate speaker cabinets (listed here)配独立音箱出货（本站机型） | 5 / 16 |
| Drive system across the whole range全线驱动方式 | 33 / 45 rpm belt drive33/45 转速皮带驱动 |
| Auto-cleaning cartridge system自清洁唱头系统 | 8 / 16 — patent pending已申请专利 |
| Granted patents已授权专利 | 30+ patents30＋ 项专利 |
Product range产品图录
Component products组件产品
Every part below is developed and made in our own factory — the same parts that go into the complete turntables, supplied fitted or on their own. Key figures are on each card; full drawings, tolerances and part numbers are available under NDA.下列部件全部自研自产，与整机同源；可随整机配套，也可单独供货。卡片列出关键参数；完整图纸、公差与料号可在保密协议（NDA）下提供。
Cartridges唱头
Moving-magnet and piezo ceramic cartridges, all made in-house.动磁与压电陶瓷唱头，全部自产。
Piezo ceramic cartridge压电陶瓷唱头
Piezo ceramic cartridge压电陶瓷唱头
Piezo ceramic cartridge压电陶瓷唱头
Moving magnet (MM)动磁（MM）
Moving magnet (MM)动磁（MM）
Tonearms唱臂
Four 9-inch tonearms — straight, S-shaped and Z-shape — all made in-house.四款 9 英寸唱臂 —— 直臂、S 臂与 Z 型直臂，全部自产。
9-inch straight arm9 英寸直臂
9-inch S-shaped arm9 英寸 S 臂
9-inch Z-shape straight arm · standard9 英寸 Z 型直臂 · 普通版
9-inch Z-shape straight arm · SME version, MM & MC compatible with quick cartridge change9 英寸 Z 型直臂 · SME 版（兼容 MM & MC，便捷更换唱头）
Platter assemblies唱盘
Complete platter assemblies, including the 33/45 belt-drive mechanism.唱盘总成，含 33/45 皮带驱动机构。
MM platter assembly动磁唱盘
Piezo platter assembly压电唱盘
Platter-integrated · patent pending唱盘集成 · 已申请专利
Auto-cleaning cartridge system唱头自清洁系统
A cleaning brush is built into the inner edge of the platter. Cleaning takes one step: move the tonearm onto it and the stylus is brushed clean — no separate cleaning kit to buy, no scrubbing the stylus by hand. One simple user action, not a fully automatic routine. Available as an add-on upgrade module, or specified into a new ODM programme.唱盘内圈集成清洁毛刷。清洁只需一步：把唱臂轻移到毛刷上，唱针随即被清刷干净 —— 不用另购任何清洁配件，也无需动手刷洗唱针。这是一次简单的用户操作，并非全自动。可作为加装升级模块，也可写入新的 ODM 方案。
Dust on the stylus is the quiet failure mode of every turntable: it dulls the treble, wears the groove, and eventually produces the returns and complaints that land on your brand rather than ours. We built the brush into the inner edge of the platter, instead of shipping a loose one in the box and hoping it gets used.唱针积灰是每一台唱机都会遇到的隐性失效：高频变暗、沟槽磨损，最终产生退货与投诉 —— 而投诉落在你的品牌上。我们把毛刷做进了唱盘内圈，而不是在包装里放一把容易被丢掉的刷子。
- Extends stylus life — dust is lifted off, not ground in延长唱针寿命 —— 灰尘被清除，而非反复碾磨
- Protects records from wear and scratches保护唱片，减少刮伤磨损
- Stable tracking — fewer pops, less distortion循迹稳定 —— 爆音更少，失真更低
How you can use it怎么用
Drop it into a model we already build as an upgrade, or specify it at programme level. Either way it is a line you can put on the box, and exclusivity is negotiable.可以直接加装到我们现有机型上作为升级项，也可以在立项时写进方案。两种方式都能成为印在包装上的卖点，独占期限可以协商。
| Status状态 | Patent pending已申请专利 |
|---|---|
| Available on搭载机型 | 8 / 16 — N688, N716, N719, N816, N817, N912, N712, N713 |
| Backed by背后支撑 | 30+ granted patents and 10 years of cartridge manufacture30＋ 项授权专利、10 年唱头制造积累 |
NS01 cartridgeNS01 唱头
Our own moving-magnet cartridge, in 14 of 16 models. Ceramic (piezo) is used only on 2 entry models, to keep their BOM competitive. Supplied on its own or fitted.自产动磁唱头，14/16 机型采用；仅 2 个入门机型使用陶瓷（压电）唱头以压低 BOM。可单独供货，也可随整机配套。
- Tracking force 2.5–3 g, stylus life 200 h针压 2.5–3g，唱针寿命 200 小时
- Stated life is a production figure, not a marketing one寿命为生产实测口径，非宣传口径
- Cartridge and replacement styli available as spare parts唱头与替换唱针可作为备件单独供应
Speaker modules音箱模组
5 models ship with separate cabinets, from 152 × 130 × 182.6 mm up to 349 × 225 × 153 mm. Cabinets can also be ordered as modules on their own.5 个机型配独立音箱，从 152×130×182.6mm 到 349×225×153mm。音箱也可作为模组单独下单。
- Cabinets finished to match or contrast the deck音箱配色可与主机配套或撞色
- Two-way configurations up to 30 W + 15 W二分频配置，最高 30W + 15W
- Cabinet, driver and crossover supplied together箱体、单元与分频器整套供应
Tonearm & turntable mechanism唱臂与唱盘机构
The tonearm, the platter and the 33 / 45 rpm belt-drive mechanism are made here — and supplied on their own, not only inside our own decks.唱臂、转盘与 33/45 转速皮带驱动机构均为自产 —— 可单独供货，不限于装在我们自己的整机上。
- Tonearm, platter, belt, motor and speed control — as a set or separate items唱臂、转盘、皮带、马达与调速电路 —— 成套或单件供应
- Speed and wow-and-flutter measured on our own bench转速与抖摆率在本厂测试台实测
- Can be supplied into a customer's own plinth design可供应给客户自有箱体方案
Cabinet and trim箱体与结构件
MDF bodies with ABS, PS, metal and PMMA trim, produced to our own drawings. This is our own manufacturing capability, but not a part we sell on its own — cabinet work ships with the complete turntable.MDF 主体配 ABS、PS、五金件与 PMMA 饰件，按本厂图纸生产。这是我们自有的制造能力，但不单独外销 —— 箱体加工随整机出货。
- MDF, ABS, PS, metal, PMMAMDF、ABS、PS、五金件、PMMA
- Colour and texture to your reference颜色与纹理可按来样定制
- Not sold separately — supplied with complete turntables不单独外销 —— 随整机提供
What we do not publish here这里没有公开的部分
Part numbers, drawings, tolerances and the full component catalogue sit behind an NDA. Tell us which part you are evaluating and we will send the specification sheet directly.料号、图纸、公差与完整组件目录在保密协议（NDA）之后提供。告诉我们你在评估哪个部件，我们直接发规格书。